INSTALLATION
KERAMAT CONNECTING SOCKET F

1. DRILLING THE BOREHOLE

Use a diamond drill bit to drill a circular hole at a right angle with and central to the pipe axis.Remove the drill core, deburr the borehole, clean, and check everything is correct.

Borehole diameter DN 125: 152 +-1 mm
Borehole diameter DN 150: 172 +-1 mm
Borehole diameter DN 200: 232 +-1 mm

Kernbohrung F

2. FITTING CONNECTING SOCKET F

Remove the clamping sleeve and insert the connecting socket in the direction of the arrow.

EINSATZ F

Place the clamping sleeve in the groove (see arrow).

Einsatz Spannhülse F

Use the KeraMat assembly tool (original KeraMat accessory) to knock the clamping sleeve firmly into place.

Festklopfen Spannhülse F

Securely tighten the vitrified clay spigot with the clamping band.

Festziehen F

TIP

For easier installation, moisten the lower compression seal and the clamping sleeve with soap suds!

Navigation
Accessories